Usedgol

1. Autodesk Autocad Structural Detailing 2015 Sp1
2. Autodesk Autocad Structural Detailing 2015 Crack
3. Autodesk Autocad Structural Detailing 2015 تحميل
4. Autodesk Autocad Structural Detailing 2015

The link between Autodesk Robot Structural Analysis (a calculation program) and Autodesk AutoCAD Structural Detailing (used to create drawings) has been designed in order to enable you to:

• Perform calculations of a defined CAD 3D model using Autodesk Robot Structural Analysis at any work stage. Calculations may be performed both for a whole structure and for a selected structure part.
• Apply a calculation model created in Autodesk Robot Structural Analysis as the basis for creation of a detailed CAD model and documentation of a designed structure.
• Autodesk Robot Structural AnalysisPerform full synchronization (from Autodesk Robot Structural Analysis to Autodesk AutoCAD Structural Detailing and vice versa) of changes made in a structure calculation model as well as in its CAD model.

Macros in AutoCAD® Structural Detailing let you generate complete concrete reinforcement drawings, together with rebar descriptions and material takeoffs. Using data from external software, by importing and exporting from Autodesk® Robot Structural Analysis Professional software, and by exporting. As of April 13, 2015, AutoCAD® Structural Detailing has been discontinued. O Autodesk has been investing in new structural detailing solutions that support a wider range of modeling and documentation needs, while supporting improved team collaboration and user productivity. Autodesk&AutoCAD 2010-2017 available. Perpetual licenses & Subscriptions. AutoCAD Structural Detailing 2015 AutoCAD SD 2015 - Product Description Structural detailing software AutoCAD® Structural Detailing software, built on the familiar AutoCAD software platform, helps structural engineers, detailers and fabricators create detailing and fabrication shop drawings.

Updating the CAD file and the file containing the structure calculation model is carried out in the Link Wizard dialog shown below. To open the Link wizard dialog from:

• Menu: Steel > Analysis Interface - Robot
• Ribbon: ASD - Model > Tools > Analysis Interface - Robot
• Toolbar: General > Analysis Interface
• Command line: RBCS_R2R.

To begin updating data for a selected Autodesk Robot Structural Analysis - Autodesk AutoCAD Structural Detailing connection defined in the current CAD file, choose an available operation:

• To create a new link (permanent or temporary), select one of the first three options.
• To update an existing link, select one of the last two options (update of a structure calculation model based on changes made in Autodesk AutoCAD Structural Detailing or vice versa).

The left pane of the Link wizard dialog displays a short description of the option selected on the right.

After you click Next, the Link wizard dialog changes as shown below, allowing you to:

• Assign a name of the defined link or select a name of the existing link
• Create or select a file with an RTD extension (a file of the Autodesk Robot Structural Analysis calculation program) in which calculation results will be saved
• Select objects that will be considered while creating a link.

To create a new link:

• For Enter new link name, specify a link name. This field is available only when you're creating a permanent link. The link is saved under a specified name in the current DWG file. Because the name identifies links, it must be unique in a given file.
• For Set path to calculation data file, specify a calculation file with an RTD extension (an Autodesk Robot Structural Analysis file) to which calculation results for the created link will be saved. This field is available only when you're creating a new permanent link. As data is updated, the path is displayed in the field, but is read-only. You can specify a file by clicking Browse, and then using one of the standard Windows dialogs that displays:
  • Open dialog - displays when you are importing data from an existing file that contains a calculation model (RTD file).
  • Save dialog - displays when you are exporting data to a new file that is being created at this stage.
• The options provided at the bottom of the Link wizard dialog let you select objects that are to be link components (the options are available only when a new link is being created):
  • Create link for entire model - select this option in order to use the entire structure
  • Select objects - select this option in order to specify individual structure objects. When you use this option, you can click the button that then lets you select objects in the drawing.

To update an existing link:

• For Choose link, select one of the permanent links available in the current DWG file. After a link is selected, it becomes active. The list of all permanent links defined in the current DWG file may be viewed (and configured, if needed) in the additional dialog that opens after you click See list.
• Click Next to display a dialog (shown below) where you can specify parameters of data transfer. The options in this dialog depend on the option (direction of data update) chosen in the first dialog.
  • For a new link, the default options are selected.
  • For an existing link, the options that are selected are those that were applied for the selected link during the last operation of data update.

You can change any of the options.

To create a link and begin data update based on the options selected in the above dialogs, clickStart data update. The current dialog is closed, and a data update report displays. Data update is an obligatory operation while creating a new link.

This dialog displays the run of the data update process. A progress bar displays at the bottom of the dialog, reporting the progress of the data update operation. Messages related to the data update process display also:

• Date of the update process
• File names (source file and target file)
• Direction of the data update process (from Autodesk AutoCAD Structural Detailing or to Autodesk AutoCAD Structural Detailing)
• Warnings

To save the contents of the data update report in a text file, click Save log file. A text file may be corrected manually by the user.

The OK and Save log file buttons are available only after the data update process is completed.

This readme contains important information regarding the installation and contents of this Service Pack. It is recommended that you read the entire document before you apply the Service Pack to your product. For reference save this document to your hard drive or print a copy.

Contents

• Installation Instructions

You can apply this Service Pack to the following Autodesk product running on all supported operating systems and languages.

This Service Pack can be applied to AutoCAD Structural Detailing 2015 installed from the following suites:

• Autodesk Building Design Suite 2015
• Autodesk Plant Design Suite 2015

Note:

• Service Pack 2 also includes all of the updates from Service Pack 1.
• Service Pack 2 can be installed on either the original version or the Service Pack 1 version of AutoCAD Structural Detailing 2015.

Problems Reported with the Customer Error Reporting Utility

As a result of the detailed information that we received from customers who used the Customer Error Reporting Utility, we were able to identify and fix a number of problems. Updates were made to the following commands and features:

Block

Service Pack 2

• Occasional crashes when inserting a parametric block from a tool palette.
• Occasional crashes when using the ribbon to insert blocks.

DB Connect

Service Pack 1

• Occasional crashes when using the DB Connect feature on a 64-bit machine with 4GB or more of RAM.

DesignCenter

Service Pack 1

• Occasional crashes when inserting a block from DesignCenter.

Image

Service Pack 2

• Occasional crashes when using Paste Special after capturing an image by Alt + Print Screen key combination.
• Occasional crashes when opening a file with embedded TIFF images.

New Tab

Service Pack 1

• Occasional crashes when clicking New in the Quick Access Toolbar or the Start Drawing tile on the New Tab page.
• Occasional crashes when clicking the New Tab Plus button after adding LayerFilterComboControl or Filter in the CUI dialog box.

Service Pack 2

• Occasional crashes when closing drawings created from a New Tab.

Status Bar

Service Pack 1

• Occasional crashes when opening drawing file when a bubble notification is still displayed.

Selection

Service Pack 2

• Occasional crashes when panning with middle mouse button immediately after selecting.

Text

Service Pack 2

• Occasional crashes when using the AutoStack feature while editing dimension text.
• Occasional crashes when copying or moving the drawing that contains shx font.

General

Service Pack 1

• Occasional crashes when choosing the 'Fully open the drawing file' option that displays when opening a drawing that was previously saved in the partial open state.
• Occasional crashes when exiting AutoCAD.

Service Pack 2

• Occasional crashes when offsetting a spline.
• Occasional crashes in AutoCAD LT when the Group Manager is left open.
• Occasional crashes when closing the drawing after the second block insertion if the visual style is set to Realistic.
• Occasional crashes when panning the drawing in 3D visual style.
• Occasional crashes when exiting AutoCAD (additional to those in SP1).
• Occasional crashes when starting AutoCAD after setting the PATH environment variable.

The following defects have been fixed:

3D Modeling

Service Pack 1

• Using the ViewCube dropdown for selecting a saved UCS will not accept UCS names that contain a space.
• The SCALE command is not applied correctly for scale factors less than 1/100th.

Service Pack 2

• In certain cases, Subtract doesn't work for regions.
• In certain cases, Slice doesn't work for the 3D solid with parts that do not touch.

3D Navigation

Service Pack 2

• In certain cases, Zoom using 3D Connexion device doesn't work properly for some models.

Array

Service Pack 2

• In certain cases, AutoCAD freezes when creating classic array for the object with geometry constraints.

Block

Service Pack 2

• In certain cases, AutoCAD freezes when using array action on dynamic block with geometry and dimension constraints.
• In certain cases, Block Editor toolbar doesn't disappear from view after exiting the Block Editor.

Display

Service Pack 1

• Cursor trails display on the screen for users with Optimus or Dynamic Switchable Graphics technology.

Service Pack 2

• Draw order is not retained when pasting dynamic blocks from other drawings.

File Navigation

Service Pack 2

• The drawing preview does not display in the File Open dialog box after using DXFIN.

Hatch

Service Pack 1

• Lineweight is applied and displayed for solid hatch objects.
• Additional lines display in the selection highlighting for a solid hatch object.
• Hatch objects do not apply the LAYLOCKFADECTL or XDWGFADECTL settings.
• The angle of a gradient changes the appearance of that gradient.
• Solid hatch objects display the edge color.

Service Pack 2

• Cannot hide hatches in a clipped view.
• The transient hatch color and transparency doesn't display in the 2D Wireframe visual style.
• The cursor stops for seconds when selecting a solid hatch with a circular boundary and legacy highlighting (SELECTIONEFFECT is set to 0).
• In certain cases, AutoCAD freezes while evaluating hatch boundaries when a drawing is opened.
• Hatch is not visible on its background if hatch background color is similar and Display plot style box is checked in the Page Setup Manager.
• In certain cases, the hatch object doesn't display the correct plot style color.
• In certain cases, the ghosted image is displayed after trimming a hatch object of a block reference.

Layer

Service Pack 2

• The layer selection is lost with multiple layer selection after changing a layer property in the Layer properties Manager.

Layout

Service Pack 2

• Cannot drag and drop a layout tab to import it into Sheet Set Manager.
• Cannot duplicate a layout tab by using the CTRL key.

Plot and Publish

Service Pack 1

• In certain cases, the ViewCube will appear on plots.

Autodesk Autocad Structural Detailing 2015 Sp1

Service Pack 2

• In certain cases, a hatch object inside a block displays incorrectly in Plot and Plot Preview.
• In certain cases, Publish will clip the margins.
• Publish doesn't work correctly when applying the named page setup for multiple layouts.

Point Cloud

Service Pack 2

• A memory leak issue results in a loss of performance or a crash.
• Point clouds are not selectable after cropping.

Selection

Service Pack 2

• When using the Windows Classic or Basic theme, cursor ghosting occurs when moving over the top of a layout viewport that is set to a 3D visual style.

VBA

Service Pack 1

• Unable to execute the SendCommand API in multiple drawings.

General

Service Pack 1

• The number of recently used files accepts a maximum of 10. The maximum has been restored to 50.

Service Pack 2

• In certain cases, the border of a layout viewport flashes when the cursor moves within model space in that viewport if it's set to a 3D visual style.
• Lines display in unexpected locations when the UCS is different than the WCS and the DYNMODE system variable is turned off.
• The Autodesk 360 ribbon tab is disabled when AdSync is installed from a deployment.
• In certain cases, AutoCAD freezes after running lisp a second time in Visual LISP.
• The model and layout tabs in source DWG files cannot be selected in the preview window of DWG import dialog.
• A memory issue occurs when switching between the Model tab and layout tabs.
• In certain cases, the horizontal scroll bar is not displayed.
• In certain cases, AUDIT doesn't fix the corrupted associative information in DWG file.

Security Hotfix

• This Service Pack includes the Autodesk AutoCAD Security Hotfix. This Service Pack can be applied whether that security hotfix was originally applied to your system or not.
• If you have Autodesk ReCap 2015 installed together with AutoCAD 2015, please install Autodesk ReCap 2015 Hotfix 1 via Autodesk Application Manager.

General Service Pack Updates in AutoCAD Structural Detailing

AutoCAD Structural Detailing 2015 Update 2 provides fixes for defects in the following areas:

AutoCAD Structural Detailing - Steel

Service Pack 1

• Improved program stability while using positioning command.
• Improved program stability while saving the user's profile to database.
• Improved program stability while updating a group in Object Inspector.
• Improved grid lines display on isometric drawing views.

Service Pack 2

• Improved stability while using the chamfer plate corner tool.
• Improved stability when opening projects saved with the previous version of AutoCAD Structural Detailing.
• Fixed an issue related to the center of gravity for circular, user defined sections.
• Improved the display of structural workframes on group drawings.
• Improved the import of files in DSTV format.
• Fixed a zoom command issue when using the Collision Detection tool.
• Fixed an issue with the TAK command when using the Dynamic View tool in the Polish version.
• Improved stability when working (changing view, zooming, etc.) with projects saved with a previous version of AutoCAD Structural Detailing.

AutoCAD Structural Detailing - Reinforcement

Service Pack 1

• Improved program stability while defining bar Detailed Table.

Service Pack 2

• Improved the rebar display in the model and drawing spaces.
• Fixed issues in Find Reinforcement command.
• Fixed a weight calculation issue in summary tables for wire fabric reinforcement.

CURSORBADGE (System Variable)

Determines whether certain cursor badges are displayed in the drawing area.

Type: Integer
Saved in: Registry
Initial value: 2

1 - Turn off certain badges
2 - Turn on all badges

Badges that will be turned off:

• Selection - crossing and window selection
• Inspection
• Deletion
• Copy
• Move
• Rotate
• Scale
• Zoom
• Add vertex
• Covert to arc
• Hatch inherit property

Note: The Autodesk 360 (AdSync) patch will automatically be installed with this Service Pack.

Before you install this Service Pack, review the following information:

Back Up Custom Files

It is recommended that you back up all custom CUIX, MNR, and MNL files before you apply this Service Pack.

Administrative Privileges

During installation, you will be prompted for the original installation media or a network image. To apply this Service Pack, you must have administrative privileges to install and uninstall products.

Network Deployment

Administrators can deploy this Service Pack over a network using the Deployment Wizard.

About Your Product

After you install the Service Pack, updated product information displays in the About dialog box.

Reboot

After you install this Service Pack, it is recommended that you reboot your system even if you are not prompted to do so.

About Windows Command Line Switches

The following Microsoft Windows command line switches are built into this Service Pack:

• /e – Extracts the MSP file from the Service Pack executable file.
• /q – Suppresses the completion message after the Service Pack is applied. This is useful if you use a script or batch file to apply this Service Pack to multiple computers.

Instructions about how to use the /e command line switch are included in the installation procedures that follow.

Autodesk Autocad Structural Detailing 2015 Crack

Apply This Service Pack to a Stand-Alone Installation

Follow these instructions to install this Service Pack on a singlecomputer.

1. Download this Service Pack and save it to any folder.
2. If required, insert the product media (for example, the AutoCAD Structural Detailing installation disc).
3. Find the folder where you saved the Service Pack and double-click the executable (EXE) file.

Follow these instructions to install this Service Pack on multiple computers using your local network.

1. Download this Service Pack and save it to any shared folder on your local network.
2. Find the shared folder where you saved the Service Pack, and double-click the executable (EXE) file.

Note: Installation through your local network using the CAD Manager Control Utility is not supported for this Service Pack.

Apply This Service Pack to a Network Administrative Image

The following distribution method applies only to administrative images created with the Deployment wizard. After you complete these procedures, subsequent deployments of your product will include this Service Pack.

In all cases, append this Service Pack to the deployment. The only time it is appropriate to merge the Service Pack is if you intend to distribute the deployment through a group policy object.

The patch (Service Pack) file that you download contains an MSP (Microsoft Patch) file, which you extract from the executable file using the /e (extract) switch.

1. From the Autodesk Product Support website, download the Service Pack EXE file to your local computer.
2. On the Start menu (Windows), click Run. Enter the following information and click OK.

   <local_drive:><patch_name> /e <local_drive:>< patch_name>.msp

3. Insert the Autodesk media and launch setup.exe.
4. Select Create Deployments. Click Next.
5. On the Begin Deployment page, in the Specify the Deployment Location box, enter the shared network location where you would like to create an administrative image, or click Browse to find a location. Users will install the product from this location.
6. In the Specify a Deployment Name box, enter the name for your deployment.
7. Continue through the Deployment wizard, open and configure the deployment in the product configuration page, click Add to find the Service Pack extracted in Step 2. Notice that the Service Pack has been added in the Include Service Pack(s) from Local Drive or Local Network box. Close and return to the product list.
8. Follow the instructions in the Deployment wizard to complete the Service Pack deployment.

Note: When the AutoCAD Structural Detailing Service Pack is included in a deployment, the deployment will install the Service Pack without the update files for Autodesk 360.

Note: The extraction of MSP from the service pack executable requires VC++ runtime redistributable 2010. Please make sure it is installed before extracting the MSP file.

Windows 7 / Windows 8

1. Start Control Panel.
2. Click Programs.
3. Click Programs and Features.
4. In the Programs and Features window, in the left pane, click View Installed Updates.
5. Find the appropriate Service Pack in the list of updates. Click Uninstall.

Thank You

We want to express our appreciation to all our customers who identified these issues and reported them to us. Their reports gave us the opportunity to improve the product for everyone's benefit. We also thank you for your continued business, and for your feedback regarding this release.

Autodesk Autocad Structural Detailing 2015 تحميل

Respectfully,

The Autodesk Structural Detailing Product Team

Autodesk Autocad Structural Detailing 2015

Copyright ©2014 Autodesk, Inc.